Skip to content

What we inspect

Ceramic and porcelain tile inspection

Ceramic and porcelain tiles

From the approved sample to the loaded container, ceramic and porcelain tiles are checked against your approved samples, specifications and order requirements.

White marble-look porcelain cut into strips and shapes for a cut-precision check
A chipped edge on a wood-look porcelain plank, flagged with marker by the inspector

Inspection process

Four inspection stages

  1. Before production and first production

    The sample approved by the buyer, the target colour, surface, size and other technical requirements are reviewed. For made-to-order products, the first tiles off the line are checked against the approved sample. Any difference is documented before large quantities are produced.

  2. During production

    Colour and surface appearance are monitored for consistency throughout production. Size, thickness, calibre, flatness and edges are checked against the order requirements. Glaze defects, stains, scratches, chipped edges, deformation and similar visible defects are photographed and recorded. Where needed, tiles produced at different times and in different batches are compared.

  3. Before shipment

    Products prepared for shipment are checked for conformity with the approved sample, the order and the acceptance criteria. Quantity, grading, carton contents and batch information are cross-checked.

  4. Packaging and loading

    The condition of the cartons, the protection of the products, pallets, labels, product codes and the information requested by the buyer are checked. Photographs document that the loaded product matches the inspected order. Where country-specific rules apply to pallets and wooden packaging, they are added to the checklist as separate items, within the requirements notified by the buyer.

From the field

What the checks look like

Grey textured porcelain tiles with a colour reference fan laid on them
Colour: textured porcelain tiles compared with a colour reference fan.
Sheets of handmade strip tiles in ochre, brown and pale green, fanned out next to each other
Shade: three colourways of handmade strip tiles laid out side by side for a shade check.
A digital caliper closed on the edge of a dark tile, with the reading on its display
Thickness: a tile edge measured with a digital caliper.
A digital glossmeter placed on the surface of a marble-look tile
Gloss: surface gloss measured with a digital glossmeter.
Close-up of a hairline crack running across the surface of a textured tile
Surface: a hairline crack found on a textured tile and recorded.
A chipped tile corner with a black marker line drawn next to it
Edges: a chipped corner marked by the inspector and photographed.
Two wood-look porcelain planks held edge to edge beside boxed stock
Size and shade: wood-look porcelain tiles compared side by side.
Strapped cartons of tiles stacked on wooden pallets in a factory warehouse
Packaging: palletised cartons checked in the warehouse before loading.
Close-up of stretch wrap torn open on a pallet of tile cartons
Packaging: torn stretch wrap on a pallet, recorded before loading.
Sample pre-shipment inspection checklist for porcelain tiles: report details, scope, a result for each item against its reference standard, overall result and notes
Ceramic and porcelain tile · pre-shipment

Sample report

What a ceramic tile report looks like

One checklist shows the product and lot, what was checked, the result of each item against its reference standard and the overall decision.

Illustrative samples. Company and inspector names are hidden; the product, quantities, figures, report numbers and signatures are examples, not a real inspection.

Get a quote

Planning a tile order from Türkiye?

Tell us the product, the factory location and the inspection date you need. We reply by WhatsApp or e-mail. No obligation.

WhatsApp Get a quote